Disk Copy Function; Executing Disk Copy Function - Fostex PD-6 Owner's Manual

Hide thumbs Also See for PD-6:

Operation manual (150 pages)

Service manual (84 pages)

Supplemental operation manual (8 pages)

Table Of Contents

Table of Contents

V2.0 Supplementary manual

The disk copy function fully copies all audio files recorded on a DVD-RAM disk (or hard disk parti-

tion) to another DVD-RAM disk (or partition). For example, if the Model 9056 optional hard disk

drive is fitted to the PD-6, you can make disk copy between a DVD-RAM disk and partition, or

between partitions.

To execute the disk copy function, use the "Disk copy" menu item newly added to the Utility mode

with the software upgrade.

<Note>

When the optional Model EX12 is fitted to the PD-6, you cannot make disk copy from a DVD-

•

RAM disk (or partition) of the EX12 to a DVD-RAM disk (or partition) of the PD-6.

You can make disk copy from a PD-6 DVD-RAM disk (or PD-6 hard disk partition) to a Model

•

EX12 DVD-RAM disk (or PD-6 hard disk partition), however, the recording capacity of the copy

destination medium automatically reduces from 4.7 GB to 1.48 GB when executing disk copy.

A disk (or partition) whose recording capacity is reduced by disk copy can restore its original

recording capacity (4.7 GB) by reformatting.

Executing disk copy function

The following procedure is assumed that the Model 9056 is fitted to the PD-6 and an audio file

recorded on the PD-6 DVD-RAM drive, which is the copy source, is loaded.

While the recorder is stopped, press the [SHIFT] key to turn on the [SHIFT] indicator, followed

by the [SETUP] key.

The PD-6 enters the Utility mode.

Use the [SEL] dial to highlight the "Disk Copy" menu item and press the [ENTER] key.

You can now select the desired copy destination (DVD-RAM disk or partition).

Depending on the option(s) fitted to the PD-6, the available copy destinations differ, as shown

on the table below.

Only the PD-6 internal hard disk drive (Model

9056) is fitted:

Only the Model EX12 is fitted:

Both the PD-6 internal hard disk drive (Model

9056) and Model EX12 are fitted:

Use the [SEL] dial to highlight the copy destination drive (or partition) and press the [ENTER]

key.