11
Needle-thread tension release (on the PFAFF 333-712/02)
.04.06
Requirement
With the take-up lever at b.d.c. the tension disks must be apart by their maximum clear-
ance of 1.0 mm.
Fig. 11 - 06
● Set take-up lever at b.d.c.
● Turn eccentric 1 (screws 2) until the tension disks are at their maximum clearance.
● Adjust tension (screw 3) according to Requirement.
3
2
1
2
Adjustment
11 - 7