D-Link DCS-6815 User Manual page 52

Section 4 - Security
After you have completed the setup of the DCS-6815 outlined in the Quick Installation Guide you will have an
operating Camera that has an assigned IP Address. When you use a router to share the Internet with one or
more PCs, the IP Address assigned to the Camera will be a local IP Address. This allows viewing within your
Local Area Network (LAN). Later, the router can eventually be configured to allow remote viewing of video over
the Internet.
1. Assign a Local IP Address to Your Camera
Run the Setup Wizard program from the CD included with the DCS-6815. Follow the steps in the Quick Installation
Guide to configure the DCS-6815. The camera will be assigned a local IP Address that allows it to be recognized
by the router. Write down this IP Address for future reference.
This is the IP Address assigned to your camera (192.168.1.169 is only an example). You will probably have a different
IP Address.
D-Link DCS-6815 User Manual
DCS-6815
52