Icom IC-910H Service Manual page 32

SOFTWARE ADJUSTMENT (continued)
ADJUSTMENT ADJUSTMENT CONDITION
S-METER 10 • Set an SSG as
Frequency
(SUB BAND)
Level
• Receiving
• Set an SSG as
11
Frequency
Level
Modulation
• Receiving
• Set an SSG as
12
Frequency
Level
• Receiving
• Connect an SSG to [VHF ANT] connector
ADJUSTMENT 1
and set as
ITEM (3)
Frequency
NOISE SQL
Level
(MAIN BAND)
Modulation
• Receiving
• Set an SSG as
2
Frequency
Level
• Receiving
• Set an SSG as
3
Frequency
Level
• Receiving
• Set an SSG as
4
Frequency
Level
• Receiving
• Set an SSG as
(SUB BAND) 5
Frequency
Level
• Receiving
• Set an SSG as
6
Frequency
Level
• Receiving
• Set an SSG as
7
Frequency
Level
• Receiving
• Set an SSG as
8
Frequency
Level
• Receiving
*This output level of a standard signal generator (SSG) is indicated as SSG's open circuit.
:
: 146.0200 MHz
: OFF
:
: 146.0200 MHz
: 3.2 µV* (–97 dBm)
: OFF
:
: 146.0200 MHz
: 32 µV* (–77 dBm)
:
: 146.0200 MHz
: 0.063 µV* (–131 dBm)
: OFF
:
: 146.0200 MHz
: 0.2 µV* (–121 dBm)
:
: 146.0200 MHz
: 0.063 µV* (–131 dBm)
:
: 146.0200 MHz
: 0.2 µV* (–121 dBm)
:
: 146.0200 MHz
: 0.063 µV* (–131 dBm)
:
: 146.0200 MHz
: 0.2 µV* (–121 dBm)
:
: 146.0200 MHz
: 0.063 µV* (–131 dBm)
:
: 146.0200 MHz
: 0.2 µV* (–121 dBm)
From The N3UJJ.COM Document Library From The N3UJJ.COM Document Library
DISPLAY
SUB FM
SUB FM
SUB FM
FM
FM
FMN
FMN
SUB FM
SUB FM
FM N
SUB
SUB FM N
5 - 14
OPERATION
Push [RIT] key to store the "S0" level
into memory, and to step next.
Push [RIT] key to store the "S9" level
into memory, and to step next.
Push [RIT] key to store the "S9+60"
level into memory. Then the display
change to the noise SQL adjust-
ment.
Push [RIT] key to store the noise
squelch thresh-hold level for FM
mode into memory, and to step next.
Push [RIT] key to store the noise
squelch tight level for FM mode into
memory, and to step next.
Push [RIT] key to store the noise
squelch thresh-hold level for FM nar-
row mode into memory, and to step
next.
Push [RIT] key to store the noise
squelch tight level for FM narrow
mode into memory, and to step next.
Push [RIT] key to store the noise
squelch thresh level for FM mode
into memory, and to step next.
Push [RIT] key to store the noise
squelch tight level for FM mode into
memory, and to step next.
Push [RIT] key to store the noise
squelch threshhold level for FM nar-
row mode into memory, and to step
next.
Push [RIT] key to store the noise
squelch tight level for FM narrow
mode into memory. Then the display
change to the AFC center adjust-
ment.