Logout; Ping; Reboot; Reset - D-Link DES-1228 Manual

6 Command Line Interface

Logout

This command closes the current connection.
Syntax
logout
Example
DES-1228> logout

Ping

This command checks if another IP address is reachable on the network. You can ping the IP
address connected to through the managed VLAN (VLAN 1 by default), as long as there is a physical
path between the switch and the target IP equipment. By default, Switch sends five pings to the
target IP.
Syntax
ping <ipaddr> [times <integer (1-255)>] [timeout <integer (1-99)>]
Parameter
Parameter
<ipaddr>
times <integer (1-
255)>
timeout <integer
(1-99)>
Example
DES-1228> ping 10.90.90.91 times 3 timeout 1
Reply Received From :10.90.90.91, TimeTaken : 20 msecs
Reply Received From :10.90.90.91, TimeTaken : 20 msecs
Reply Received From :10.90.90.91, TimeTaken : 20 msecs
--- 10.90.90.91 Ping Statistics ---
3 Packets Transmitted, 3 Packets Received, 0% Packets Loss
DES-1228>

Reboot

This command reboots the system. All network connections are terminated and the boot code
executes.
Syntax
reboot
Example
DES-1228> reboot
% Device will reboot, please wait a few minutes to re-login.
DES-1228P>

Reset

All configurations will be reset to the default settings.
Figure 93 – The logout command
Description
The IP address of the target station.
Specify how many ping requests will be sent to the target IP address.
Specify the timeout interval waiting the ping reply for target IP address.
Figure 94 – The ping command
Figure 95 – The reboot command
58
D-Link Web Smart Switch User Manual