Power Trim And Tilt Models - Yamaha 40v Owner's Manual
Hide thumbs
Also See for 40v:
- Owner's manual (251 pages) ,
- Service manual (224 pages) ,
- Owner's manual (96 pages)
Table of Contents
Advertisement
the water, increasing the chance of ac-
cident and personal injury.
ECM00260
NOTICE
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
EMU32840
Procedure for hydro tilt models
1.
Place the gear shift lever in neutral.
2.
Pull the tilt lock lever up to the release
position.
3.
Slightly tilt the outboard motor up to the
desired position and push the tilt lock le-
ver down to the lock position.
4.
To return the outboard motor to the nor-
mal running position, pull the tilt lock le-
ver up to the release position and slowly
tilt the outboard motor down.
5.
Push the tilt lock lever down to the lock
position.
EMU32851
Power trim and tilt models
The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM00260
NOTICE
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
EMU32912
Procedure for power trim and tilt models
1.
Place the remote control lever / gear
shift lever in neutral.
ZMU03120
Operation
ZMU03121
53
Advertisement
Table of Contents
