Luns; Modify Vendor Storage; Monitoring The Status Of File Serving Nodes - HP IBRIX X9720 Administrator's Manual

The Drives panel lists the drives in all of the MDS600 systems. The Location field shows where the
drive is located. For example, if the location is Port: 52 Box 1 Bay:7, the drive is in bay 7. The
port number specifies the switch number and switch port. For port 52, the drive is connected to
port 2 on switch 5. For location Port: 72 Box 1, Bay 6, the drive is connected to port 2 on switch
7 in bay 6.
See the administrator guide
Options
Add: Registers and names the vendor storage in the management console database. Available
vendor storage types are LeftHand, MSA, 3PAR, and EqualLogic.
Remove: Removes the specified vendor storage name and access information from the Fusion
Manager database.

LUNs

The LUNs page includes a list of all the LUNs registered for use by the snapshot function.

Modify vendor storage

Set proxy IP address
Vendor IP address
Vendor storage resources must be identified and discovered before they can be used to create
filesystem snapshots. Use this dialog to set the proxy IP address for the selected vendor storage.

Monitoring the status of file serving nodes

The dashboard on the GUI displays information about the operational status of file serving nodes,
including CPU, I/O, and network performance information.
To view this information from the CLI, use the ibrix_server -l command, as shown in the
following sample output:
ibrix_server -l
SERVER_NAME
-----------
node1
node2
File serving nodes can be in one of three operational states: Normal, Alert, or Error. These states
are further broken down into categories describing the failover status of the node and the status
of monitored NICs and HBAs.
State Description
Normal Up: Operational.
Alert Up-Alert: Server has encountered a condition that has been logged. An event will appear in the Status
tab of the GUI, and an email notification may be sent.
Up-InFailover: Server is powered on and visible to the Fusion Manager, and the Fusion Manager is
failing over the server's segments to a standby server.
Up-FailedOver: Server is powered on and visible to the Fusion Manager, and failover is complete.
Error Down-InFailover: Server is powered down or inaccessible to the Fusion Manager, and the Fusion
Manager is failing over the server's segments to a standby server.
Down-FailedOver: Server is powered down or inaccessible to the Fusion Manager, and failover is
complete.
Down: Server is powered down or inaccessible to the Fusion Manager, and no standby server is providing
access to the server's segments.
92 Monitoring cluster operations
pertaining to your version of HP StoreAll storage for additional details.
STATE CPU(%)
------------ ------
Up, HBAsDown
Up, HBAsDown
NET_IO(MB/s) DISK_IO(MB/s)
------------ -------------
0 0.00
0 0.00
BACKUP HA
------ --
0.00 off
0.00 off