HP IBRIX X9720 Administrator's Manual page 147

Storage configuration
Networking on the blade
7. On the Join a Cluster — Step 2 dialog box, enter the requested information.
NOTE: On the dialog box, Register IP is the Fusion Manager (management console) IP, not
the IP you are registering for this blade.
8. The Network Configuration dialog box lists the interfaces configured on the system. If the
information is correct, select Continue and go to the next step.
If the information specified for a bond is incorrect, select the bond and then select Configure
to customize the interface. On the Select Interface Type dialog box, select Bonded Interface.
On the Edit Bonded Interface dialog box, enter the IP address and netmask, specify any bond
options, and change the slave devices as necessary for your configuration.
Recovering an X9720 or 9730 file serving node 147