HP IBRIX X9720 Administrator's Manual page 42

4. The wizard also attempts to locate the IP addresses of the iLOs on each server. If it cannot
locate an IP address, you will need to enter the address when prompted. When you have
completed the information, click Enable HA Monitoring and Auto-Failover for both servers.
5. Click Next to continue. The NIC HA Setup window appears.
6. Use the NIC HA Setup window to configure NICs that will be used for data services such as
SMB or NFS. You can also designate NIC HA pairs on the server and its backup and enable
monitoring of these NICs.
If you need to add NICs, click Add NIC. the Add NIC dialog box appears. See "Adding a
NIC" for more information. Once the NIC is added, it displays on the NIC HA Setup window
of the wizard and you can continue with the high availability configuration.
42 Configuring failover