Appendix D: Wall Mounting The Soundtouch™ Controller - Bose SoundTouch SA-4 Owner's Manual

Appendix D: Wall mounting the
SoundTouch™ controller
The wall mount bracket contains magnetic material. Please
WARNING:
contact your physician if you have any questions whether this might
affect the operation of your implantable medical device.
Follow these instructions to wall mount your SoundTouch
bracket as a template to mark the holes.
Bracket
Wallboard (anchors and screws supplied):
1.
Use a / in. (5 mm) drill bit to drill two holes into
³
16
or thicker wallboard.
2. Insert the provided anchors into the holes and tap lightly to secure.
3. Align the bracket (tab at top) to the anchors. Tighten the provided screws into
the holes.
4. Align the latch to the bracket's tab. Attach the controller.
Wood:
1.
Purchase two #6x1 in. (25.4 mm) flat-head wood screws.
2. Use a
/ in. (2.78 mm) drill bit to drill 2 holes into
7
64
or thicker wood.
3. Align the bracket (tab at top) to the holes. Tighten the screws into the holes.
4. Align the latch to the bracket's tab. Attach the controller.
controller. Use the
™
Tab
/ in. (9.5 mm)
³
8
/ in. (19 mm)
³
4
Appendices
English - 33