Table of Contents
Advertisement
Polaroid • I0312/I0313
3). Playing back the recording:
In the USB drive, the recorded program will be saved in the folder "_MSTPVR" on the device. To play back
the.TS format files, use the DMP (Digital Media Player) function found in "Applications" in the MAIN MENU
as shown on page 15-16, and select Movie as the type of file to play back. Alternatively, press the "
(Angle Button) repeatedly on the Remote Control to display the saved Recorded List in either Program,
Channel or Time order.
1. Video may become pixelated if the video bit rate is too high for the USB drive. If this occurs, try using a
faster USB drive, or re-format it using the High Speed Format option.
NOTE:
This may make the drive un-readable in other USB devices.
2. The USB PVR function relies on the use of high quality USB drives, and as such may not be compatible with
some specific USB devices.
10. Timeshift function
Prepare to record the program
This TV allows you to pause and record the currently watched digital TV program to a USB storage device,
and to resume viewing at the point where it was paused.
NOTE:
Formatting a USB 2.0 storage device will be needed. Save the original data on your USB device before
formatting. All the data stored in the USB device will be erased after formatting.
USB Drive Storage Format
Follow the Format instructions on page 18 of this Manual to format the USB device and allocate the
amount of space for the Time Shift function.
NOTE:
The format process will take at least 2 minutes depending on the capacity of your USB device. Please do
not turn off the power or remove the USB device during formatting. The High Speed format option is
recommended for better HDTV recording results.
During formatting, a speed test will be done on the USB device. If it fails, it means the USB device may
not support the Time Shift function.
Record a paused DTV program to USB storage device
1. While in the DTV input source, insert USB storage device to the USB port on the side of your TV.
2. Select a DTV channel, then press
paused on screen; the Time Shift OSD appears and recording commences. Press
time-paused material.
3. Press
STOP
to stop the Time Shift function and stop recording program.
NOTE:
Please do not unplug the USB storage device when the Time Shift function is activated, as damage to the
recorded file or the USB storage device may occur.
Approximately 4GB of memory buffers about 30-40 minutes of DTV material.
PAUSE
to start the Time Shift function. The TV program will be
Play
-19-
play to playback the
FB
FF
Prev.
Next
Pause
OPERATION
"
00:00:33/00:04:22
Stop
Advertisement
Table of Contents
