Table Of Contents Important Safety Instructions--------------------------------------------------2 Product Features ---------------------------------------------------------4 Disc Information -------------------------------------------------------------------5 Front Panel---------------------------------------------------------------------------6 Rear Panel----------------------------------------------------------------------------8 Remote Control---------------------------------------------------------------------9 System Connections------------------------------------------------------------12 Connecting to External AV Signal Source------------------------------------12 Connecting to External AV Signal Source (YPbPr) ------------------------13 Connecting to External AV Device (AV Out) --------------------------------14 Connecting to PC ------------------------------------------------------------------15 Connecting to Earphone ---------------------------------------------------------16 Connecting to Power Supply----------------------------------------------------16...
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Page 4
Important Safety Instructions Note: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do not put product on bed, sofa or anything that blocks ventilation.
Product Features This product incorporates a DVD player, LCD display and TV receiver in one system. Multiple Modes DVD mode Component mode VGA mode TV mode COMPOSITE mode S-VIDEO mode High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines.
Disc Information Discs Formats Supported By This Player DISC LOGO JPEG The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc. About Disc Terms Title Generally, pictures or music compressed on a DVD are divided into several sections, “title”. Chapter The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one or more chapters and each of them is numbered for easy searching.
Front Panel 1. 15" color TFT screen High resolution 15" color TFT screen clearly show your images. 2. SOURCE button Press to select the modes: DVD, Component, VGA, TV, COMPOSITE or S-VIDEO. 3. MENU button Press to enter or exit setup menu. ▲...
Page 8
Front Panel (Continued) 7. ■ STOP button Press to stop playback, then press the PLAY button to resume normal playback in DVD mode. Press the STOP button twice to stop playback completely. 8. Eject button Press to eject the disc out. 9.
Rear Panel 1. Y/Pb/Pr Input Jack (Component) Connected Y/Pb/Pr Component mode. 2. L/R Audio Input Jack Connected to the L/R audio input in Component mode. 3. AV Output Jacks Connected to the external AV input device. 4. AV and S-Video Input Jacks In the S-VIDEO mode, connected to S-VIDEO signal input.
Remote Control Preparation of Remote Control Softly push the back cover to open the battery compartment. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Softly press the back cover to close it. Under normal use the battery will last for six months.
Remote Control Basic Operation 1. POWER button Press to enter or exit the standby mode. 2. 0~9 Number buttons Press to select numbers. LAST button In the TV mode, press to return to the channel last viewed. 4. MTS button Press to activate MTS function in TV mode.
Page 12
Remote Control For DVD Operation PLAY button Press to play the disc in DVD mode. 2. PAUSE button In DVD mode, press to pause the playback or start step-by-step playback. Then press the PLAY button to resume normal playback. FB button Press the FB to search backward in DVD mode.
System Connections • Do not connect the power cord to the unit until all other connections have been made. • Ensure that you observe the color cord when connecting audio and video cables. Connecting to External AV Signal Source Use the audio and video cable to connect the AV input jacks on the rear panel of the unit to the external AV signal source.
System Connections (Continued) Connecting to External AV Signal Source(YPbPr) Use the audio and video cables to connect the Y/Pb/Pr input Jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and then press the SOURCE of the remote or the unit and select Component as the input mode..
System Connections (Continued) Connecting to External AV Device(AV Out) The unit supports AV signal output, it can be connected to the external audio and video devices. Use the audio and video cables to connect the AV output jacks on the rear panel of the unit to the external AV device.
System Connections (Continued) Connecting to PC The unit can be connected to PC (personal computer) via the VGA cable. Follow these steps and the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. 2.
System Connections (Continued) Connecting to Earphones This unit can be connected to an earphone for listening music privately. See the below figure for details: After connecting to the earphone, the internal speakers will turn off automatically. Connecting to Power Supply Plug the power supply cord to the AC100~240V wall outlet.
System Connections (Continued) Connecting to Car Adapter Power also can be supplied through the DC power adapter (Car Adapter), one end is connected to the DC 12V IN jack on the rear panel of the unit, the other end to the vehicle’s 12V accessory/cigarette lighter/power outlet, as shown on the below: Attention Do not operate the unit or view video software while driving a vehicle.
System Connections (Continued) Connecting to TV Antenna This unit can be connected to the TV signal input source via the TV jack on the rear panel. After connection, turn on the power of the unit, press the SOURCE button of the remote or the unit and select TV as the input mode.
TV Setup and Operation Preparations 1. After making your connections, press the POWER button to turn on the power. (If it is turned on, the power indicator is blue.) 2. Press the SOURCE button to shift to TV mode. You can go on with the following operations: Image Setting Note: This item is only available when there is signal input.
TV Setup and Operation (Continued) Contrast Setup Press the ▲▼ button to select Contrast and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Hue Setup Press the ▲▼ button to select Hue and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu.
TV Setup and Operation (Continued) Treble Setup Press the ▲▼button to select Treble and press the ◄► button to adjust the level. Press the MENU button to return to the previous menu. Balance Setup Press the ▲▼ button to select Balance and press the ◄► button to adjust the level. Press the MENU button to return to the previous menu.
TV Setup and Operation (Continued) Parental Setting Note: The Parental Function is the same as that of V-CHIP. Press the MENU button to enter the setup menu. Press the ▲▼ button to select Parental and press the ENTER button to enter the menu shown on the right.
Page 24
TV Setup and Operation (Continued) Clear All Press the ▲▼ button to select Clear All and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection. Press the MENU button to return to the previous menu.
Page 25
TV Setup and Operation (Continued) CA Eng Rating Press the ▲▼ button to select CA Eng Rating and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection. Press the MENU button to return to the previous menu.
TV Setup and Operation (Continued) Setup Setting Press the MENU button once to enter the setup menu. Press the▲▼ button to select Setup and press the ENTER button to enter the menu shown on the right. In the Setup menu, press the▲▼ button to select the desired item and press the ENTER button to enter.
Page 27
TV Setup and Operation (Continued) Channel System Press the ▲▼ button to select Channel System and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection. Press the MENU button to return to the previous menu.
Page 28
TV Setup and Operation (Continued) Fine Tune Press the ▲▼ button to select Fine Tune and press the ENTER button to enter. Press the ► or ◄ button to start fine tuning forward or backward. Press the MENU button to return to the previous menu.
DVD System Setup Preparations 1. Connect to the power supply and turn on the unit. 2. Press the SOURCE button to select the DVD mode. 3. Press the SETUP button on the remote control to display the settings menu. The menu includes General setup, Audio setup, Video setup, and Preference.
Page 30
DVD System Setup (Continued) OSD Lang Screen Saver Last Memory Media Center The item is used to select the OSD language. 1. Press the direction buttons to select OSD Lang. 2. Press the ENTER button to enter the setup. 3. Use the direction buttons to select items.
Page 31
DVD System Setup (Continued) Audio Setup Page Press the SETUP button to enter the General setup menu, then use the select Audio Setup Page, the screen will display as the following: Dolby Digital Setup Dual Mono Dynamic In the menu, Use the direction buttons to select the desired item.
DVD System Setup (Continued) Hdcd Setup In the Audio Setup Page, use the button to enter the setup, the screen will display as below: Video Setup Press the SETUP button to enter the General setup menu, then use the select Video Setup Page, the screen will display as the following: Video Quality Setup Select Quality, press the ENTER button to enter the menu as below: direction buttons to select Hdcd Setup, press the ENTER...
DVD System Setup (Continued) Sharpness Brightness Contrast Preference Setup Press the SETUP button to enter the General setup menu, then use the select Preference Page, the screen will display as the following: 1. Press the direction buttons to select Sharpness. 2.
Page 34
DVD System Setup (Continued) Audio Subtitle Disc Menu Default 1. Press the direction buttons to select Audio. 2. Press the ENTER button to enter the setup, see the left figure: 3. Press the direction buttons to select audio language. 4. Press the ENTER button again to confirm setting and return.
DVD Playback Operation Preparation:After making all your connections turn on the unit and select the relevant video input before playback. Disc Loading Steps: 1. Press the POWER button to turn on the power. Press the SOURCE button to shift to DVD mode.
Page 36
DVD Playback Operation (Continued) Stop Press the ■ STOP button once to stop playback and then press PLAY button to resume. Press this button twice to stop playback completely. Pause Press the PAUSE button once to pause the playback, press it repeatedly to start frame-by-frame playback, press the PLAY button to resume normal playback.
Page 37
DVD Playback Operation (Continued) Language (Audio) There can be up to 8 audio languages on a DVD disc. When you play a multi-language DVD disc you can press the AUDIO button on the remote control to select a language. Subtitle The DVD player can support multiple kinds of subtitles.
DVD Playback Operation (Continued) Fast Playback Press the FWD/REV SCAN button on the remote control to activate fast backward or forward playback. Repeat Use the REPEAT button repeatedly to repeat Track, All or to cancel repeat. ◆ Some discs do not support the repeat function. Audio During CD playback, press the AUDIO button on the remote control to select the audio output mode: Mono Left, Mono Right, Mix-Mono and Stereo.
Page 39
DVD Playback Operation (Continued) Previous and Next During playback, press the button to select picture. Menu Press the MENU button once to stop playback and return to the root menu. GOTO During playback, press the GOTO button on the remote control once, use the number buttons to input the file number.
USB and SD/MS/MMC Card Function USB and SD/MS/MMC Card Function Preparation: 1. Connect the unit to the power supply. 2. Press the POWER to turn on the unit. 3. Press the SOURCE button to shift to DVD mode. 4. Insert the USB into the unit’s USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the unit.
Other Functions External AV Input Function The unit has external AV input function. It supports COMPOSITE, S-VIDEO and Component modes. Use the audio, video and S-Video cable to connect the unit to the external AV signal source such as recorder, vidicon, satellite receiver or game player etc. Then turn on the unit and the external AV signal source.
Troubleshooting SYMPTOM The player cannot play. There is no sound. LCD does not display an image or is blank. Cannot continue to play and play a section repeatedly. There is no picture or the picture moves up and down. The remote control does not work.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. "Polaroid" and “Polaroid and Pixel” are trademarks of Polaroid Corporation, Waltham, MA, USA. For service, support and warranty information, visit in the US call 1-866-289-5168 and in Canada call 1-866-301-7922.