Mechanical Instructions - Philips 26MF231D/37 Service Manual

www.freeservicemanuals.info

4. Mechanical Instructions

Index of this chapter:
4.1 Assy/Panel Removal
4.2 Set Re-assembly
4.1 Assy/Panel Removal
Front view
Back view
Step 1. Remove the stand.
Remove the three screws as Fig.3 and Fig.4
Fig.3
Step 2. Remove the Back cover and Main shield assy as Fig.5~12.
a. Remove the 7 screws
b. Use thin "I" type screwdriver to open 4 clicks on bottom
side as Fig.6
c . Use thin "I" type screwdriver to open 2 clicks on right
side as Fig.7
e. Use thin "I" type screwdriver to open 2 clicks on left
side as Fig.8
f. Use thin "I" type screwdriver to open 6 clicks on top
side as Fig.9
g. Remove the back cover as Fig.10 .
h. Remove the 13 screws as Fig.10,Fig.11,Fig.12 , then remove the
Main shield assy.
4. Mechanical Instructions
Fig.4
and the other 2 screws on the sides as Fig.5
Fig.5
Fig.1
Fig.2
Step 3. Remove the Scaler, Power,IR, Key Control, Side AV and USB
board.
Remove the 14 screws and disconnect the 12 cables as Fig. 13 .
It`s Free
TPE1.0U LA
Fig.6
Fig.7
Fig.8
Fig.9
Fig. 10
Fig. 11
Fig. 12
7