Scanner Labeling - Symbol LT 1850 Quick Reference

38
Laser Devices
Symbol products using lasers comply with US 21CFR1040.10, Subchapter J and IEC825/EN 60 825 (or IEC825-1/EN 60 825-1, depending on the date of manufacture). The laser classification
is marked on one of the labels on the product.
Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is required to comply with US and international regulations:
Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure
to a Class 2 laser is not known to be harmful.

Scanner Labeling

Class I
Symbol U.S. Federal (FDA)/IEC825/EN60825 Class 1 laser products use low power visible or IR lasers. Class 1 laser devices are not considered to be hazardous when used for their intended
purpose. To comply with U. S. Federal and International regulations, the following statement is required.
CAUTION: Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous visible or invisible laser light exposure.
This advisory statement also applies to all other FDA/IEC825/EN60825 classes of laser products.