Service Adjustment Menu Operation - Sanyo PLC-XF47 Service Manual

● Service Adjustment Menu Operation
Follow the procedures described below for the adjustments with service mode.
1. Turn the projector Power ON.
2. Enter Service adjustment menu.
Press and hold the MENU and IMAGE button on the projector simultaneouly for more than 3 seconds, or press and hold
the MENU button on the remote control unit for more than 20 seconds. The service adjustment menu appears on the
screen.
3. Select Adjustment Group No. and Item No. which are to be adjusted.
Select Adjustment Group No. by pressing "MENU" and "IMAGE" buttons.
Press point UP ( ▲ ) and DOWN ( ▼ ) buttons to select Item NO.
4. Adjust data value or change setting matter with point LEFT ( 7 ) and RIGHT ( 8 ) buttons.
5. Press POWER "ON/STAND-BY" button once and close the service adjustment menu.
To enter "service mode"
Press "MENU" and "IMAGE" buttons
on the projector simultaneously
and hold for 3seconds.
FOCUS
ZOOM
ON/STAND-BY
MENU
LENS SHIFT
SELECT
<
AUTO PC ADJ. IMAGE SEL.
SERVICE ADJUSTMENT MENU
Service Mode
Signal Input
Source
FOCUS
ZOOM
Group No.
Select with MENU and
IMAGE buttons.
MENU
LENS SHIFT
SELECT
<
AUTO PC ADJ. IMAGE SEL.
To adjust "service mode"
Adjust service data using the following control
buttons on the projector or the remote control
unit.
"MENU" ............... Group No. increases.
ZOOM
"IMAGE" .............. Group No. decreases.
"point UP" ........... Item No. increases.
"point DOWN" .... Item No. decreases.
"point RIGHT" ..... Data value increases.
INPUT 1/2 MENU
"point LEFT" ....... Data value decreases.
INPUT 3/4
<
AUTO PC ADJ.
Input
Group NO. Data
20 0
Ver.
ON/STAND-BY
Item No.
Select with point UP and
DOWN buttons.
INPUT 1/2
SELECT
INPUT 3/4
<
FOCUS
ON/STAND-BY
INPUT 1/2
LENS SHIFT
SELECT
INPUT 3/4
IMAGE
80
Data
Adjust with point LEFT
and RIGHT buttons.
FOCUS
ZOOM
SELECT
<
MENU
LENS SHIFT
SELECT
<
AUTO PC ADJ. IMAGE
- 85 -
Electrical Adjustments
To exit "service mode"
Press "POWER ON/STAND-BY"
button once on the projector or the
remote contorol unit to quit the
service mode.
FOCUS
ZOOM
MENU LENS SHIFT
SELECT
<
AUTO PC ADJ. IMAGE SEL.
Remote Control
ON/STAND-BY
INPUT 1/2
INPUT 3/4
ON/STAND-BY
INPUT 1/2
INPUT 3/4