NEC MATWORX NWA-008862-001 Installation Manual page 21

NOTE 2:
1. Launch Microsoft Windows on your PC.
2. Insert the MATWorX CD in the CD-ROM drive.
NOTE:
3. Select Run from the Start taskbar.
4. A dialog similar to the following is displayed.
5. Type D: Setup in the Open text box and click
OK button.
NWA-008862-001 Rev.2.1
ajch1001.fm
The following procedure assumes that you
are starting the Setup program from your
computer's CD-ROM drive D:. If you start
from a different drive, substitute the letter
of that drive in this procedure.
If you set your PC starting the Setup
program of MATWorX automatically when
inserting a CD in the CD-ROM drive, the
Welcome dialog is displayed. At this time,
advance to step 6 (skip step 3 to 5).
Run Dialog
CHAPTER 1 MATWorX
3. Installing MATWorX
Page 15