NEC MATWORX NWA-008862-001 Installation Manual page 19

The requirements on this LAN connection are shown
below.
Name
ETHER card
(PZ-M606-A)
LAN Cable*
* : Prepared by customers
Name
PC*
Printer*
Printer Driver*
Printer Cable*
NIC*
LAN Cable*
* : Prepared by customers
NOTE:
NWA-008862-001 Rev.2.1
ajch1001.fm
Requirements on PBX Side
qt.
1 Used for LAN interface
1 10BASE-T/100BASE-TX
Requirements on PC Side
qt.
1 Refer to
Requirements"
1 Printer which can print a
sheet of letter-sized paper
on Windows
1 Printer driver software
attached to the printer
1 Cable attached to the
printer or optional cable
1 Used for LAN interface
1 10BASE-T/100BASE-TX
During connection, do not use energy saving
features on your PC, such as RESUME,
SUSPEND and STANBY.
CHAPTER 1 MATWorX
2. Hardware Connections
Remarks
Remarks
"System
in detail
Page 2
Page 13