Table of Contents
Advertisement
CHAPTER 1 MATWorX
2. Hardware Connections
3.
Mount the ETHER card on the MP card.
For details, refer to NEAX 2000 IPS System
Manual.
4.
Mount the MP card in the MP slot of PIM0.
5.
Connect the LAN connector of the ETHER card
and the HUB/Router using a LAN cable.
6.
Establish the communication setting (LAN
Connection) between your PC and the PBX using
Configuration Wizard.
Page 12
NWA-008862-001 Rev.2.1
ajch1001.fm
Advertisement
Table of Contents
