To Use The Menus - Haier L24C1180 Service Manual

2.2 To Use the Menus

1. Press the Menu button to display or close the main menu.
2. Use the Navigation Ring to move around, select, adjust or confirm an item in the OSD (On Screen Display)
menu.
Press the Menu button to enter the main OSD. Adjust the items including Video menu, Audio menu, Feature
menu, Channel menu, and VGA menu. However, some options in the menus may only be enabled in a particular
source mode.
CHANNEL MENU
The Channel menu in TV mode is shown below.
1. Tuning Band: Select TV source signal from the Air (antenna) or Cable (CATV).
2. Channel Strength: Show the intensity of the received DTV signal.
3. Auto CH Search: Automatically scan all NTSC / ATSC TV channels and then store them in the channel table.
During the channel scan process, the OSD will display the number of channels which have been found.
4. Add on CH Search: Rescan and add channels which are newly found.
5. Channels List: Show the Channels List. You can select which channels are viewable.
6. Channel Labels: Shows the NTSC / ATSC TV Channel Labels. You can edit the labels.
7. FAV Channel Setting: Show the Favorite Channel List. You can add/remove channels from the favorites list.
VIDEO MENU
The Video menu in most source modes is shown below. It provides several video adjustment items for fine tuning
the video display. Only in VGA source mode, the Video menu provides: Picture mode, Brightness, Contrast,
Color Temp, Noise Reduction, Backlight, Aspect Ratio and Preset.
1. Picture Mode: Adjust the best picture appearance from selecting the preset value of Vivid, Standard, Eco, Movie,
7