Table of Contents
Advertisement
11. RGB Digital Input/Output Connectors (DVI-D 24 pin)
These connectors are used for double or triple stacking.
Use the supplied DVI-D cable to connect the OUTPUT terminal of the
first projector to the second projector's INPUT until all the projectors
are connected.
Push the left side of the panel to open the compartment for the
RGB Digital connectors and the optional SDI board.
OUTPUT
INPUT9
RGB
DIGITAL
11
(SX6000 only)
E – 5
OUTPUT
INPUT 0
SDI
Space to install the optional SDI or SX
HDSDI board.
Advertisement
Table of Contents
