ZyXEL Communications ZyAIR b-2000 Quick Installation Manual page 23

ZyAIR B-2000 v. Broadband Wireless Sharing Router
2
traffic initiated from the WAN by configuring port-forwarding rules, one-to-one/many one-to-one mapping
rules and/or allow remote management.
The firewall is automatically enabled when you configure blocked services. When you configure a remote
management menu to allow access to the ZyAIR, a firewall rule (WAN-to-WAN) is automatically created.
Click ADVANCED and FIREWALL to open the Settings screen. Enable (or activate) the firewall by
selecting the Enable Firewall check box as seen in the following screen.
Figure 4 Firewall Settings
The following table describes the fields in this screen.
23