Setting Up Your Computer's Ip Address - ZyXEL Communications ZyAIR b-2000 Quick Installation Manual

LED COLOR
LAN 1-4 Green
Orange
WAN Green
Orange
SYS Green
Red
PWR Green

3 Setting Up Your Computer's IP Address

Skip this section if your computer is already set up to accept a dynamic IP
The ZyAIR is already set up to assign your computer an IP address. Use this section to set up your
computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range
with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can communicate with
your ZyAIR.
ZyAIR B-2000 v. Broadband Wireless Sharing Router
2
Table 1 Front Panel LED Description
STATUS
On The ZyAIR has a successful 10Mbps Ethernet connection.
Blinking The ZyAIR is sending/receiving data.
Off The ZyAIR does not have a 10Mbps Ethernet connection.
On The ZyAIR has a successful 100Mbps Ethernet connection.
Blinking The ZyAIR is sending/receiving data.
Off The ZyAIR does not have a 100Mbps Ethernet connection.
On The ZyAIR has a successful 10Mbps WAN connection.
Blinking The ZyAIR is sending/receiving data.
Off The ZyAIR does not have 10Mbps WAN connection.
On The ZyAIR has a successful 100Mbps WAN connection.
Blinking The ZyAIR is sending/receiving data.
Off The ZyAIR does not have a 100Mbps WAN connection.
On The ZyAIR is functioning properly.
Off The ZyAIR is not ready or has malfunctioned.
Blinking The ZyAIR is rebooting.
On The ZyAIR is receiving power.
Off The ZyAIR is not receiving power.
address. This is the default for most new computers.
DESCRIPTION
7