Table of Contents
Advertisement
TURNING ON THE POWER
Turn ON the power switch (PWRSW) on the PN-RTA card. The system status is displayed as follows:
(1)
Self-diagnosis is executed. Upon normal termination, the diagnosis result "Pass" is displayed.
(2)
The program is loaded. The name of the program to be loaded is displayed.
While the program is being loaded, "--" indicates the progress of loading.
(3)
Upon normal termination of loading, a prompt is displayed.
IX1000 Series Router POST (Power On Self Test)
DRAM TEST 1
DRAM TEST 2
NVRAM TEST
CPU TEST
PLD TEST
LAN1 TEST
LAN2 TEST
VOLTAGE
TEMPERATURE : +36.0degC Pass
Copyright (C) NEC Corporation 2001. All rights reserved.
Copyright (C) 1985 − 1998 OpenROUTE Networks, Inc.
Copyright (C) 1995 − 1998 Eric Young
No valid boot records found, attempting flash load
Loading using Flash Load Image "ix1000 − ms − 4.0.5.ldc"
------------------
Starting at 20000
NEC Portable Internetwork Core Operating System Software
Copyright Notices :
Copyright (C) NEC Corporation 2001 − 2002. All rights reserved.
Copyright 1985 − 1998 by OpenROUTE Networks, Inc., All rights reserved
Copyright 1984 − 1987, 1989 by J. Noel Chiappa
Copyright 1995 − 1998 by Eric Young
Router #
: Pass
: Pass
: Pass
: Pass
: Pass
: Pass
: Pass
: 3.199V Pass
(1)
Execution of
self − diagnosis
(2)
Program loading
(3)
Command prompt
display
– 93 –
CHAPTER 4 INITIALIZATION
TURNING ON THE POWER
NWA-008869-001 Rev.1.0
atch4001.fm
Advertisement
Table of Contents
