Memory; Transferring Documents Received In Memory; Checking And Deleting Copy Jobs - Canon imaqeRunner 1019J Advanced Operation Manual

Advanced Send
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
■
Transferring Documents Received in

Memory

1.
Press [System Monitor].
2.
Press [ ] or [ ] to select <RX/TX
STATUS>, then press [OK].
3.
Press [ ] or [ ] to select the desired
document, then press [OK].
NOTE
You can transfer only the documents received in memory, which
appears with the message <RX STNDBY> in the system
monitor.
4.
Press [ ] or [ ] to select <TRANSFER>,
then press [OK].
5.
Use the numeric keys to enter a fax number,
then press [OK].
You can only enter the number using the numeric keys.
The machine starts to send the selected document.
Back Previous
■

Checking and Deleting Copy Jobs

1.
Press [System Monitor].
2.
Press [ ] or [ ] to select <COPY
STATUS>, then press [OK].
3.
Press [ ] or [ ] to scroll through the job
list.
When you delete the copy job, press [OK], then press [
select <YES>.
4.
Press [Stop] to return to the standby mode.
TOP
Next
] to
5-3