Package Contents; Minimum Requirements; Hardware Installation - TRENDnet TE100-S50g Quick Installation Manual

1. Before You Start

Package Contents

Ÿ
TE100-S50g/TE100-S80g
Ÿ Multi-Language Quick Installation Guide
Ÿ
Power Adapter (7.5V DC, 1A)
If any of the above contents are missing, please contact your reseller.

Minimum Requirements

Ÿ A computer with a network adapter installed
Ÿ CAT-5, CAT-5e or CAT-6 Network Cable
Ÿ
The surface must support at least 265g for the Switch.
Ÿ The power outlet should be within 1.8 meters (6 feet) of the Switch.
Ÿ
Visually inspect the DC power jack to make sure that it is securely
connected to the power adapter
Ÿ
Make sure that there is proper heat dissipation from and adequate
ventilation around the switch
Ÿ
Do not place heavy objects on the switch

2. Hardware Installation

1. Connect the Power Adapter to the
TE100-S50g/TE100-S80g and then
to a power outlet.
2. Connect a CAT-5, CAT-5e or CAT-6
RJ-45 network cable from the
computer to an available Ethernet
port on the TE100-S50g/
TE100-S80g.
1