Table of Contents
Advertisement
48415_Layout 1 28/08/2012 09:04 Page 6
Safety Seal
•
There is a Safety Seal
Lid (3). This is to prevent leakage from your Easy
Blend when in use and for when the Beaker
upside down.
•
Always ensure the Safety Seal is in place before
use. Failure to do so could cause damage to the
appliance.
•
Ensure the Safety Seal is correctly located before
the Beaker is screwed onto the Blade Lid.
Usage
Do not operate your Easy Blend continuously for
more than 40 seconds. After using for this length
of time, let it cool down for 10 minutes before
using again.
Suitable foods
Your Easy Blend is ideal for blending a wide range
of foods, including fruit and dairy. However it is
NOT suitable for the following uses;
•
Grinding or mashing heavy foods (e.g. potatoes
or meat.)
•
Stirring thick mixtures (eg dough.)
•
Do not use hot liquids in the blender as it can be
ejected out of the appliance due to sudden
steaming.
Crushing Ice
•
If using ice in a recipe (i.e. blending it with other
liquids,) do not use more than 6 ice cubes.
•
Only crush ice as part of the recipe - do not crush
ice on it's own.
6
(7)
in place on the Blade
(1)
is
Tips
•
To reduce the thickness of the smoothie, use the
Pulse setting.
•
Ensure when removing the full Beaker
Main Unit
(4)
hold the edge of the Blade Lid
and twist. DO NOT hold the Beaker.
•
If using seeded berries, it is recommended to
sieve the drink before serving for smoother
consistency.
•
When using spirits for making cocktails, the
ingredients need a longer blending time. If not
blended enough the alcohol settles at the bottom
as it is the heavier liquid.
Care and cleaning
It is important to clean your Easy Blend
immediately after use.
Switch your Easy Blend off and unplug from the
1.
electrical outlet.
Remove the Safety Seal
(7)
2.
WARNING: Extreme care must be taken when
washing the metal Blade
Wash all parts except the Main Unit
3.
soapy water, dry thoroughly. Do not allow the
Blade Lid to stand in water.
A small brush can be used to help dislodge food
from under the Blade on the Blade Lid.
Replace the Safety Seal into the Blade Lid before
4.
use. Ensure the Safety Seal is correctly located
before the Beaker is screwed onto the Blade Lid.
Clean the Main Unit with a damp cloth. Do not
5.
immerse in water.
•
The Beakers
(1)
and Caps
safe, place on the top shelf on a cool wash only.
WARNING: Always unplug the appliance before
cleaning.
(1)
from the
(3)
from the Blade Lid (3).
(2)
as it is sharp.
(4)
in hot
(6)
are dishwasher
Advertisement
Table of Contents
