Table of Contents
Advertisement
403020.qxp_Layout 1 28/10/2014 09:24 Page 6
Hold the Blade Lid and twist to unlock from
the Main Unit. DO NOT hold the Beaker.
Safety Seal
•
There is a Safety Seal
Lid (10). This is to prevent leakage from your Easy
Blend when in use and for when the Beaker
upside down.
•
When inserting the Safety Seal, ensure that it is
pressed tightly into the channel in the Blade Lid.
Ensure the Safety Seal is correctly located before
the Beaker or Jug
Lid.
•
After screwing the Blade Lid onto the Beaker or
Jug, look inside to check the Safety Seal is
securely fitted before attaching to the Main Unit
(6).
•
Always ensure the Safety Seal is in place before
use. Failure to do so could cause damage to the
appliance.
•
The Safety Seal only needs to be removed for
cleaning. After cleaning ensure the seal is
reinserted as directed before using the Easy
Blend.
6
(11)
in place on the Blade
(9)
(5)
is screwed onto the Blade
7
Unscrew the Blade Lid from the Beaker. For
drinks on the go, attach a Sports Lid
Beaker.
Usage
After 40 seconds of continuous use you will need
to switch off your Easy Blend and leave to cool
for 5 minutes, to prevent overheating.
For Juicing, after 60 seconds of continuous use,
switch off and leave to cool for 30 seconds.
Crushing Ice
•
If using ice in a recipe (i.e. blending it with other
liquids). Do not use more than 6 ice cubes.
•
Only crush ice as part of the recipe - do not crush
ice on its own.
is
8
(8)
to the
Advertisement
Table of Contents
