Device Configuration - Omron V400-R2 Connection Manual

5.2. Device Configuration

The hardware components to reproduce the connection procedure of this document are as
follows:
Personal computer
（Sysmac Studio
installed,
OS: Windows 7)
USB cable
Manufact
urer
OMRON Serial Communications Unit
OMRON NJ-series CPU Unit
OMRON Power Supply Unit
OMRON Sysmac Studio
OMRON CX-Protocol
OMRON Sysmac Studio project file
OMRON CX-Protocol project file
- Personal computer (OS: Windows7)
- USB cable
(USB 2.0 type B connector)
OMRON Ultra Small Multi-code Reader
OMRON Special cable (RS-232C)
- 5 VDC power supply
Precautions for Correct Use
Prepare the latest project file and protocol macro data in advance.
To obtain the files, contact your OMRON representative.
Precautions for Correct Use
Update the Sysmac Studio and CX-Protocol to the versions specified in this section or higher
versions using the auto update function. If a version not specified in this section is used, the
procedures described in Section 7 and subsequent sections may not be applicable. In that
case, use the equivalent procedures described in the Sysmac Studio Version 1 Operation
Manual (Cat. No. W504) and the CX-Protocol Operation Manual (Cat. No. W344).
5. Applicable Devices and Device Configuration
NJ501-1500
CJ1W-SCU42
Special cable (RS-232C)
Name
V509-W011
5 VDC power supply
Model
CJ1W-SCU42
NJ501-1500
NJ-PA3001
SYSMAC-SE2[][][]
(Included in Sysmac
Studio.)
OMRON_V400-R2_PMC
R232C_EV100.smc
OMRON_V400-R2_PMC
R_EV100.psw
-
-
V400-R2CF65
V509-W011
-
Code Reader
V400-R2CF65
Version
Ver.2.0
Ver.1.05
Ver.1.06
Ver.1.97
Ver.1.00
Ver.1.00
7