Chicago Pneumatic CP 0022 Safety And Operating Instructions Manual page 15

CP 0022, CP 0032, CP 0069
CAUTION Hot insertion tool
The tip of the insertion tool can become hot and
sharp when used. Touching it can lead to burns and
cuts.
Never touch a hot or sharp insertion tool.
►
Wait until the insertion tool has cooled down
►
before carrying out maintenance work.
NOTICE Never cool a hot insertion tool in water,
it can result in brittleness and early failure.
9800 0901 90a | Original instructions
Safety and operating instructions
Fitting the drill steel
CP 0022 KL, CP 0032, CP 0069
Whenever fitting the drill steel the following
instructions must be observed:
1. Push the retainer inwards in the direction of the
arrow, until the front portion of the retainer is
able to accommodate the drill steel collar.
2. Insert the drill steel in the chuck.
3. When the drill bottoms, push back the retainer
to lock it
15