Gigaset C530 IP Owner's Manual page 58

Restoring phone to default setting
The individual settings are reset.
Resetting the base via the menu
When the settings are reset
u
Handsets are still registered
u
The system PIN is not reset
The following settings in particular are reset to the default settings (you can change the settings
marked "*)" via the Web configurator):
u
The entered VoIP connections (are deleted)
u
The assignment of send and receive connections
u
Audio settings for VoIP connections *)
u
DTMF settings *)
u
Own area code
u
Settings for the local network
u
The names of the handsets
u
Eco Mode are deactivated
u
PABX connection settings
u
Digit and display key assignments as well as the
u
Settings for network services: Call Forwardings
The following lists are deleted:
u
Call lists
v Ï
¤ ¤ ¤ q System
OK
After the reset, the base is restarted. The restart takes around ten seconds.
The installation wizard is launched (
Resetting the base using a key on the base
As with resetting the base via the menu, all individual settings are reset. The system PIN will
also be reset to "0000" and all handsets registered above and beyond the delivery scope are
deregistered.
Note
For instructions on re-registering the handsets after a reset (where applicable)
¤
Remove the cable connections from the base station to the router and fixed line network.
¤
Remove the base station mains unit from the socket.
¤
Press and hold the registration/paging key (
¤
Plug the power adapter back into the power socket.
¤
Press and hold the registration/paging key (at least 20 seconds).
¤
Release the registration/paging key. The base has now been reset.
¤ ¤ q Base Reset
OK
¢
page 13).
¢
Configuring the system settings
key
¤ ¤
OK Enter system PIN.
page 3).
¤ ¤
OK Yes
¢
page 69.
57