Gigaset C530 IP Owner's Manual page 53

Configuring the system settings
Entering your own local area code
Please note the following for local calls (calls using the local fixed line network):
u
For local calls using your fixed line network, you generally (depending on the exchange) do
not have to dial an area code. All the calls in the call list are saved with area codes. In order to
be able to call back a caller from the call list, you have to save the local area code in the phone
for the area your phone is in (Own Area Code). If your phone is in a "multiple area code" area,
you also have to enter the other area codes for this area as Extra Area Codes.
u
You have to dial the area code for local calls using your VoIP connection. If you have saved
your local area code in the phone and activated the Predial long distance access code for
VoIP calls option using the Web configurator (
without a local area code, the local area code that has been entered is included automatically
(e.g. when dialling from the phonebook).
Entering your own local area code
v Ï q
¤ ¤ ¤
OK
(a maximum of three characters; digits and the characters, "*", "#").
Entering extra codes
v Ï q
¤ ¤ ¤
OK
q
¤
Select an entry ("–––" = empty entry).
¤
necessary. Enter the extra code (maximum 3 characters; digits and the characters "*", "#"
are permitted).
¤
Repeat the steps above until you have entered all the extra codes for your area. You can save
a maximum of five extra codes.
¤
Save
Activating/deactivating music on hold
Ï
v
¤ ¤ ¤
q Audio Settings
OK
Setting the IP address of the base in LAN
Prerequisite: Your base is connected to a router or a PC (
An IP address is required in order for the LAN to "recognise" your phone.
The IP address can be assigned to the phone automatically (by the router) or manually.
u
If the address is assigned dynamically, the router's DHCP server automatically assigns an IP
address to the phone. The IP address can be changed according to router settings.
u
With manual/static assignment, you assign a static IP address to the phone. This may be
necessary depending on your network configuration (e.g. if your phone is connected directly
to a PC).
Note
To assign the IP address dynamically, the DHCP server on the router must be activated.
Please also read the user guide for your router.
v Ï
¤ ¤ ¤ q System
OK
¤
If system PIN is something other than 0000: Enter the system PIN.
52
q
¤
Telephony Own Area Code
q
¤
Telephony Extra Area Codes
¤
OK
¤ ¤ q Local Network
OK
¢
page 113), when numbers are dialled
¤ ¤
OK
¤
OK
Ñ
¤
Delete a previously entered extra code if
¤
q Music on hold
¢
page 12).
¤
OK
Enter your own area code
¤
Save
³
¤
Change ( = activated).
¤
OK