Gigaset C530 IP Owner's Manual page 46

Activating/deactivating the information ticker
You can display text information from the Internet that is set for the screensaver Info Services as
a scrolling message in the idle display.
v Ï
¤ ¤ ¤ q Display
OK
The ticker starts as soon as the telephone changes to idle status. If a message is shown in the idle
display, the information ticker is not displayed.
Setting the colour scheme
Ï
You can set the display to show a dark or a light background.
v
¤ ¤ ¤
OK Display
¤
Scheme 2 Select (Ø = selected)
Setting the display backlight
The display backlight is always activated when the handset is not in the base/charging cradle or
when a key is pressed. Any digit keys pressed appear on the display for pre-dialling.
Ï
You can activate/deactivate the display backlight for idle status:
v ¤ ¤ ¤
OK
¤ r On / Off
In Charger:
¤ r On / Off
Out of Charger:
¤
Save
Note
The On setting can significantly reduce the standby time of the handset.
Activating/deactivating Auto Answer
When set to Auto Answer, the handset accepts an incoming call as soon as you remove it from
Ï
the charging cradle.
v
¤ ¤ ¤ q Telephony
OK
Regardless of the Auto Answer setting, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold c for a further 2 seconds while placing
the handset in the charging cradle.
Changing the handsfree/earpiece volume
You can set the volume of the earpiece and speaker at 5 levels independently of each other.
t
Handset Volume
Or:
Ï
¤ ¤ ¤
v
OK
r
¤
r Set earpiece volume.
¤
Set speaker volume.
Setting the volume during a call:
automatically saved after approx. 3 seconds.)
t
If is assigned to another function:
¤ ¤ q Volume
Options
¤ ¤ q Info Ticker
OK
¤ ¤
OK Colour Schemes
q Display ¤ ¤
OK
¤
OK
q Audio Settings
s
¤
Scroll to the Speaker: line.
¤
Save
t
¤ ¤
¤ ¤
OK Make the setting.
Adjusting the telephone settings
¤
Edit (
¤ ¤
OK
q Backlight ¤
OK
¤ ¤
Auto Answer
¤ ¤
OK Handset Volume
r
Select the volume.
³
= activated)
q Colour Scheme 1 / Colour
³
Change ( = activated).
¤
OK
¤
Save (The setting is
45