Setting Up An Internet Connection - Mercedes-Benz Comand Operating Instructions Manual

Setting up an Internet connection (Canada)
126
option, which is used to calculate the associated
connection costs.
Conditions for a Bluetooth
The mobile phone supports at least one of the
R
®
Bluetooth profiles DUN (Dial-Up Network-
ing) or PAN (Personal Area Network).
The Bluetooth
the Internet connection of the mobile phone
to be made available to the system.
Conditions for a USB connection
The mobile phone supports at least one of the
R
USB classes:
RNDIS (Remote Network Driver Interface
-
Specification)
CDC/NCM (Network Control Model)
-
CDC/ECM (Ethernet Control Model)
-
CDC/ACM (Access Control Model)
-
The USB classes enable the mobile phone
Internet connection to be made available to
the system.
The terms of use are shown when the system is
used for the first time and then once a year
thereafter. Only read and accept the terms of
use when the vehicle is stationary.
The driver is not permitted to call up websites
while driving and use of the Mercedes-Benz
Apps is restricted.
i
The availability of individual Mercedes-Benz
Apps may vary depending on the country.

Setting up an Internet connection

(Canada)
Procedure and general information
If you are using Internet access for the first time,
you must enable the connected mobile phone
for Internet access (
nected mobile phone supports the Bluetooth
PAN profile or the USB classes RNDIS,
CDC/NCM or CDC/ECM, you do not need to
make additional settings. The Internet connec-
tion is established. If the connected mobile
phone does not support the named Bluetooth
profile or the named USB classes, predefined
( page 127) or manual access data
Y
( page 127) must be set.
Y
While initializing the mobile phone for the Inter-
net connection, access data which is already on
the mobile phone may be overwritten. You
®
connection
®
profiles DUN and PAN enable
page 126). If the con-
Y
should therefore check the settings on the
mobile phone (see the manufacturer's operating
instructions).
Enabling the mobile phone for Inter-
net access
Call up Internet functions (
X
To switch to the menu bar: slide 6 the con-
X
troller.
To select Settings: turn and press the con-
X
troller.
To select Configure Internet
X
turn and press the controller.
A message is displayed telling you that the
settings for the Internet functions depend on
your mobile phone network provider and your
mobile phone.
If a mobile phone has already been enabled,
the device list is displayed.
To select Start
X
controller.
Mobile phones are displayed that:
are connected to the multimedia system
R
fulfill the conditions for the Internet func-
R
tions
have not yet been set up for the Internet
R
function
®
To select a mobile phone from the device list:
X
turn the controller and press to confirm.
If the mobile phone supports the Bluetooth
PAN profile or the USB classes RNDIS, CDC/
NCM or CDC/ECM, Internet access is set up.
®
You can use the Internet functions.
If the connected mobile phone does not sup-
port the named Bluetooth
named USB classes, predefined (
or manual access data (
set.
page 129).
Y
Settings:
Search: turn and press the
®
profile or the
page 127)
Y
page 127) must be
Y
®