Mercedes-Benz Comand Operating Instructions Manual page 48

Vehicle settings
46
i
The brightness can be adjusted using the
controller on the rotary light switch.
You can find further information on the interior
lighting in the vehicle Operator's Manual.
Setting the EASY-ENTRY/EXIT feature
This function makes getting in and out of your
vehicle easier.
Call up Vehicle Settings
X
To select Easy
X
the controller.
The setting element is active.
To change the setting: press the controller.
X
You can find further information on the EASY-
ENTRY/EXIT feature in the vehicle Operator's
Manual.
Activating/deactivating the acoustic
locking confirmation
You can also set an audible signal to confirm
that the vehicle has been locked.
Call up Vehicle Settings
X
To select Acoustic Lock
X
and press the controller.
The function switches on or off, depending on
the previous setting.
You can find further information on the locking
feature in the vehicle Operator's Manual.
Activating/deactivating the seat-belt
adjustment function
The Belt Adjustment
er's and front-passenger seat belt to the upper
body of the occupants.
Call up Vehicle Settings
X
To select Belt
X
the controller.
The function switches on or off, depending on
the previous setting.
You can find further information on seat-belt
adjustment in the vehicle Operator's Manual.
( page 45).
Y
Entry/Exit: turn and press
( page 45).
Y
Feedback: turn
function adjusts the driv-
( page 45).
Y
Adjustment: turn and press
Activating/deactivating the auto-
matic folding mirror function
When the Automatic Mirror Folding
tion is activated, the exterior mirrors fold in
automatically as soon as you lock the vehicle
from the outside. The exterior mirrors fold out
automatically again as soon as you unlock the
vehicle.
Call up Vehicle Settings
X
To select Automatic Mirror
X
and press the controller.
The function switches on or off, depending on
the previous setting.
You can find further information on the auto-
matic folding mirror function in the vehicle Oper-
ator's Manual.
Switching locator lighting on/off
If you switch on the Locator Lighting
tion, the exterior lighting is switched on for a
short time when it is dark. The light switch must
be set to à (see the vehicle Operator's Man-
ual).
The exterior lighting remains on for 40 seconds
after the vehicle is unlocked. When you start the
engine, the locator lighting is switched off and
automatic headlamp mode is activated.
Call up Vehicle Settings
X
To select Locator Lighting: turn and press
X
the controller.
Press the controller.
X
The function is switched on or off, depending
on the previous status.
You can find further information on the locator
lighting in the vehicle Operator's Manual.
Switching the automatic locking fea-
ture on/off
The vehicle is locked automatically when the
ignition is switched on and the vehicle is travel-
ing faster than walking pace.
Call up Vehicle Settings
X
To select Automatic
X
press the controller.
The function switches on or off, depending on
the previous setting.
func-
( page 45).
Y
Folding: turn
func-
( page 45).
Y
( page 45).
Y
Locking: turn and