Real-Time Traffic Report - Mercedes-Benz Comand Operating Instructions Manual

To switch to navigation mode: press the
X
Ø button.
To show the menu: slide 6 the controller.
X
To select Traffic: turn and press the con-
X
troller.
To select Traffic Symbol
X
turn and press the controller.
The map appears and shows the available
traffic information as icons. The first traffic
information is highlighted.
To highlight additional traffic symbols, select
X
Next or Previous.
To move the map: select Map.
X
You can move the map to enable further traf-
fic information to be displayed.
You can have the traffic report relevant to a traf-
fic icon shown.
To select Details: turn and press the con-
X
troller.
The report shows the following information:
State/province, road and display of the affec-
R
ted direction
Section of the road to which the traffic report
R
applies
Traffic icon and traffic report
R
To close the detailed display: press the
X
% button.
Displaying reports on the route
Information:
The function is only available while route guid-
ance is active. It shows the available traffic
reports affecting the current route.
If there are no reports for the route or the func-
tion is not supported in the selected language:
the
cannot be selected.
To switch to navigation mode: press the
X
Ø button.
To show the menu: slide 6 the controller.
X
To select Traffic: turn and press the con-
X
troller.
To select
X
press the controller.
The traffic report window appears. Several
traffic reports may be available for the calcu-
lated route, marked for example by 1/3.
The report shows the following information:
R
R
R
To display the next/previous traffic
X
report: turn the controller.
To close the display: press the % button.
X
Real-time traffic reports
Messages On Route menu item is gray and
Messages On
State/province, road and display of the
affected direction
Section of the road to which the traffic
report applies
Traffic icon and traffic report
Route: turn and
Z
81