Yamaha GP 338F Servise Manual page 16

(6) Loosen the three ground wire holding screws on the
reverse side of the coil plate. and loosen the four
pulser holding screws (two each per pulser) and four
1. Charging coil
2 . Lighting coil 1
3 . Lighting coil 2
4. Spacer
5. Pan head screw
6. SJ;lring washer
7
Pulser
8. Pan head screw
Fig. 2-22
- 13-
ENGINE -
C.D.I. Magneto
pulser coil holding screws (two each per pulser coil).
Then remove the pulser coils from the coil plate.
9.
Spring washer
10. Plain washer
11. Lead wire assembly
12. Lead clamp
13. Lead clamp
14.
Pan head screw
15. Spring washer
16. Pan head screw