Operations On The Ak-Hrp200 Remote Operation Panel - Panasonic aw-he40 series Operating Instruction

Basic operations
■

Operations on the AK-HRP200 Remote Operation Panel

For operating the camera menus.
When the [CHARA/MENU] button is pressed
for 2 seconds, the selected camera menu
is displayed, overlapping the camera output
image. When it is pressed for 2 seconds while
a camera menu is displayed, the menu is
exited.
SELECT:
Turn SELECT to move the cursor up and
down in the camera menu or to change
setting values. Press SELECT to move to
the next level of a menu item or to change a
setting value at the lowest level.
●
Camera menu operation
1
Press and hold the [CHARA/MENU] button on
the AK-HRP200 for about 2 seconds.
The AW-HE40 camera menu appears on the monitor.
2
Turn the SELECT dial to select an AW-HE40
camera menu item or to change a setting value.
Turn the SELECT dial to move the cursor up and down
or to change setting values.
Press the SELECT dial to move to the next level of a
menu item or to change a setting value at the lowest
level.
3
To exit the camera menu, press and hold the
[CHARA/MENU] button for about 2 seconds.
32
(continued)
HEAD VF
POWER POWER
5600K MATRIX
SHIFT SCENE 1
USER 1
VR LOCK
DTL
UP ND
M.GAIN
DATA
SET
DOWN DISPLAY SELECT
ND/CC M.GAIN/M.PED SHUTTER
SET UP
SHIFT
+
SAVE/LOAD
UP+DOWN
CHARA
MENU
TALLY/CALL
ALM
EXT
SELECT
D.EXT
AUTO
CLOSE
CLOSE
AUTO
BARS WHITE BLACK SET UP
TEST
KNEE DTL SHUTTER
SKINDTL OFF OFF ON
STEP/SYNC
SCENE/USER FILE
SCENE 2 SCENE 3 SCENE 4 STORE
USER 2 USER 3
GAIN
FLARE/PED
CC SHT SYNC CAMERA
M.PED 10-19
No.
IRIS
For selecting the cameras to be operated.
SELECT
1. Press and hold the [SELECT] button for
EXIT EXECUTE
IRIS/M.PED LOCK IRIS M.PED about 2 seconds.
PUSH
The camera number in the camera number
PREVIEW
display area blinks.
OPT
SENSE
2. Press the lit [UP]/[DOWN] button.
Press the lit [UP]/[DOWN] button to select
COARSE
the camera number.
OPEN
3. Press the [SELECT] button.
FULL
Control of the selected camera is enabled.