Part 1 - Package Contents - Q-See qc40198 Quick Installation Manual

PART 1 - PACKAGE CONTENTS

QC40198 or
QC40196 DVR
Color Cameras with Stands
Pre-Installed
Hard Drive
Power Supply
for DVR
USB 2.0
Mouse
The appearance of contents may differ from images shown.
4, 8 or 16 Manual and
Software CD
Ethernet
Video/Audio Dongle
Cable
Video and Power
Power Supply & 4- or
Camera Cable
8-Way Splitter
(One per Camera)
Remote
Control
Revised 9/8/11
PART 2 - DVR CAMERA AND POWER CONNECTIONS
STEP 1: Connect the Cameras
manuals and
software
QC Series
to the Cables
Connect the Video/Audio Dongle to the Audio/Video port on the bottom of the DVR.
1A
Attach the BNC connector on the
1C
power/video cable to one of the BNC
connectors marked "Video" on the
Video/Audio Dongle.
Repeat for all cameras.
1D
Connect the remaining
connector to one of the
ends on the power
splitter. Repeat for all
cameras.
STEP 3:
STEP 2:
Connect the other power supply to the DVR .
Connect the single end
of the power splitter to
the included power supply.
STEP 4:
Connect both power supplies to
a surge protector.
It is STRONGLY recommended to use a surge protector that
IMPORTANT!
is UL-1449 rated. Look for a clamping voltage of 330 or lower, a Joule rating
of at least 400 and a response time of 10 nanoseconds or less.
Connect both camera leads to the matching
1B
ends on the power/video cable.
Repeat for all cameras.
STEP 5:
Connect thesurge protector
to an outlet.