Sony XDCAM PMW-500 Operation Manual page 115

OPERATION
Menu items Sub-item
Rec Function Slow & Quick
Makes settings
related to special
recording modes.
Frame Rate
Note
When Picture Cache
is assigned to an
assignable switch,
this item is disabled
(displayed in grey).
Clip Continuous
Rec
Picture Cache Rec On/Off
P. Cache Rec Time 0-2sec/2-4sec/4-6sec/
Interval Rec
Frame Rec
Number of Frames The available settings
Settings
On/Off
The available settings
vary depending on the
Format >HD System Line
setting.
When Format >Country is
set to other than [PAL
Area] in UDF mode or in
FAT mode: 1 to 30
When Format >Country is
set to [PAL Area] in UDF
mode: 1 to 25
When Format >Country is
set to other than [PAL
Area] in UDF mode or in
FAT mode: 1 to 30 to 60
When Format >Country is
set to [PAL Area] in UDF
mode: 1 to 25 to 50
On/Off
6-8sec/8-10sec/10-12sec/
12-14sec/13-15sec
On/Off
On/Off
vary depending on the
settings in Format >HD
System Line and Format
>System Frequency.
2frame/6frame/12frame
1frame/3frame/6frame/
9frame
Description
Turns the Slow & Quick Motion
function on or off. (When this is set to
On, the Picture Cache Rec, Interval Rec,
and Frame Rec sub-items are set to Off.)
When the Slow & Quick setting is On,
sets the frame rate for Slow & Quick
Motion shooting.
When the HD System Line setting is
1080.
When the HD System Line setting is
720.
Turns the Clip Continuous Rec function
on or off. (When this is set to On, the
Slow & Quick, Picture Cache Rec,
Interval Rec, and Frame Rec sub-items
are set to Off.)
Turns the picture cache function on or
off. (When this is set to On, the Slow &
Quick, Interval Rec, Frame Rec sub-
items are set to Off.)
When the Picture Cache Rec setting is
On, set the picture cache time.
Turns the Interval Rec function on or
off. (When this is set to On, the Slow &
Quick, Picture Cache Rec, and Frame
Rec sub-items are set to Off.)
Turns the Frame Rec function on or off.
(When this is set to On, the Slow &
Quick, Picture Cache Rec, and Interval
Rec sub-items are set to Off.)
When Interval Rec or Frame Rec is set
to On, specifies the number of frames to
shoot in one Interval Rec or Frame Rec
take.
When the HD System Line setting is
720, and the System Frequency setting
is 59.94P or 50P.
When the HD System Line setting is
other than 720, or the System Frequency
setting is other than 59.94P or 50P.
Menu List 115