Displaying The Expand Thumbnail Screen - Sony XDCAM PMW-500 Operation Manual

• In HD mode, clips with OK marks are not deleted,
even when a deletion is executed for a group of clips
that includes them.
1
In the thumbnail screen, select the
thumbnails of the clips to delete and
then select THUMBNAIL >Delete All
Clips.
The confirmation message "Delete All
Clips?" appears.
2
Select [Execute], and press the MENU
knob.
The deletion starts.
During the deletion, the progress of the
deletion is displayed.
If you executed the deletion in HD mode,
only HD-mode clips are deleted.
If you executed the deletion in SD mode,
only SD-mode clips are deleted.
To cancel the deletion
Press the RESET/RETURN button.
When the deletion finishes
A completion message appears, and the
THUMBNAIL menu screen appears again.
Displaying the Expand Thumbnail
Screen
The expand thumbnail screen allows you to
search inside clips by using thumbnails (see
page 94), to change index pictures (see
page 105), and to add and delete shot marks (see
page 105).
To display the screen
In the thumbnail screen, select a thumbnail and
press the DISP SEL/EXPAND button (see
page 20) or select THUMBNAIL >Thumbnail
View >Forward Expansion.
An expand thumbnail screen for the selected clip
appears.
Expand thumbnail screen in UDF/FAT-HD
mode
UDF / FAT-HD
In UDF mode or FAT-HD mode, the selected clip
is divided into 12 equally-sized blocks, and a
thumbnail of the first frame in each block is
displayed.
Number of the selected frame
S1 S2
Clip properties are shown at the bottom of the
screen.
Except for the items listed below, the information
displayed here is the same as the information
displayed in the normal thumbnail screen.
a Frame information
This displays frame information using icons.
Index picture
Frame with Shot Mark1
S1
S2 Frame with Shot Mark2
The same icons are also displayed beneath the
thumbnails. However, when several icons could
be displayed for the same frame, one icon is
selected for display, in the order of priority Index
picture > Shot Mark1 > Shot Mark2.
b Timecode
This displays the timecode of the selected frame
in the expand thumbnail screen.
Expand thumbnail screen in FAT-SD
mode
FAT-SD
In FAT-SD mode, only in the case of clips that
have been split into partial files because the file
size was larger than 2 GB, a thumbnail of the first
frame of each partial file is displayed.
Thumbnail Operations
S2 S1
103