Amp Device Mode; Tun Device Mode; Cd Device Mode; Bd Device Mode - Arcam FMJ A39 Handbook

AMP Device Mode

TUN Device Mode

The A Device Mode button configures the CR902 to The T Device Mode button configures the CR902 to
control your Arcam amplifier. Pressing this button does control the tuner functions of Arcam tuners.
not affect the currently selected input on the amplifier.
P Toggles power between standby and on
P Toggles power between standby and on
The numeric keys are used to store and
0 9
...
recall presets
The numeric keys 2 & 7 can be used for
source selection (without changing the
Cycles through the front panel display's
2
DISP
CR902 Device Mode)
brightness options
7 2
CD input (no change to CR902 mode)
Cycles through tuner sources
BAND
7
input (no change to CR902 mode)
TUN
) Rewind iPod
Cycles through the front panel display's
DISP ( Fast forward iPod
brightness options
Preset down/Sirius category down/iPod
Cycles through the display modes on the
]
MODE track back
front panel
Preset up/Sirius category up/iPod track
Displays the amplifier setup menu on the
[
MENU forward
front panel
# Stop iPod
$ Play/pause iPod
Navigate menus O confirms a selection
& Play/pause iPod
@ Toggles the mute function of the amplifier
Cycle through iPod shuffle modes
SHUFF
Decrease ( – ) and increase ( + ) amplifier Displays the tuner setup menu on the front
Vol-
MENU
volume
Vol+ panel
Toggles Speaker 1 output
SP1 ' , Preset up/down, iPod track back/forward
Toggles Speaker 2 output
SP2 < > Decrement/increment tuning frequency
O Confirm a selection
Cycle through iPod repeat modes
RPT
Toggle FM mode between mono and stereo
FM MONO
reception
P/TUNE Enter/Exit Preset recall mode
Enter/Exit Preset store mode
STORE
Cycle through different information display
INFO
modes

CD Device Mode

BD Device Mode

The c Device Mode button configures the CR902 to The B Device Mode button configures the CR902 to
control the CD functions of Arcam CD players. control the BD functions of Arcam BD players.
P Toggles power between standby and on
P Toggles power between standby and on
! Open/close disc tray
!
Open/close disc tray
The numeric keys allow direct access to
The numeric keys allow direct access to
individual tracks on a disc. To select a track
individual tracks on a disc. To select a track
press the corresponding keypad button.
press the corresponding keypad button. 0 9
...
0 9 For tracks greater than 9, enter the digits
...
For tracks greater than 9, enter the digits
in sequence. For example, to play track 15,
in sequence. For example, to play track 15,
press 1 , then press 5 .
press 1 , then press 5 .
Cycles through the front panel display's
Cycles through the front panel display's
DISP
brightness options
DISP
brightness options
Changes the available display modes on the
Changes the available display modes on the MODE
BD player
MODE
CD player
) Fast rewind
) Fast rewind
( Fast forward
( Fast forward
Skip back to the start of the current/
]
Skip back to the start of the current/
previous track
]
previous track
[ Skip forwards to the start of the next track
[ Skip forwards to the start of the next track
# Stop playback
# Stop playback
$ Play
$ Play
& Toggles pause of playback
& Toggles pause of playback
Changes audio decode format (Dolby
AUDIO
Digital, DTS, etc.).
Toggles random ('shuffle') play on and off
SHUFF
MENU Activates BD player menu.
Enter a track in a programmed track list
MENU
Navigates track listings if supported by the
Navigates track listings if supported by the
player O selects the currently highlighted
player O selects the currently highlighted
track if supported by the player
track if supported by the player
Returns navigation to the top level of the
.
Repeat playback of the disc or pre-
menu ('Home').
programmed selection of tracks. To repeat a
When navigating a menu, press this key to
RPT
particular track, select that track and press
RTN
return to the previous screen or selection
twice. To cancel, press a third time.
RPT RPT
Toggles random ('shuffle') play on and off
SHUFF
Toggles between Programme and Normal
SETUP Repeat playback of the disc or pre-
play
programmed selection of tracks. To repeat a
RPT
A-B repeat function
AUDIO particular track, select that track and press
twice. To cancel, press
Toggles between selecting the HD and CD RPT
SUBT
Toggles between selecting the HD and CD
layer of SACD disc
SACD
layer of SACD disc
E-12

troubleshooting

a third time.
RPT
If you are having trouble with your amplifier, check the
following items.

No sound

Sound cuts-out unexpectedly

Check the following: If the temperature of the internal heatsink rises above
a safe level, then a thermal cut-out inside the amplifier
The amplifier is switched on.
<
operates to protect the unit and the protection system
The A39 is not muted (i.e. MUTE (mute) is not
<
temporarily removes power to the speakers. The system
shown on the display panel; the power LED is
will reset itself as the heatsink cools down.
showing green, not orange or red).
With two pairs of low-impedance speakers
<
< The selected source going in to the A39 is
connected (6Ω or less), overloads are more likely.
generating audio (e.g., if CD is selected, then the
Overloading the amplifier may cause it to shut
CD is playing).
down because of overheating.
The speaker outputs on the A39 are active and the
<
Note that, due to the high output voltage from some
<
appropriate speaker LED is showing green.
CD players, it is possible to drive your amplifier
at full power even though the volume is not set at
maximum.
E-13