Features; Symbols - Ryobi P232 Operator's Manual

SERVICE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to the nearest
AUThORIZED SERVICE CENTER for repair. When
servicing, use only identical replacement parts.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision
Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye
protection which is marked to comply with ANSI Z87.1.
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out microscopic particles.
PRODUCT SPECIFICATIONS
Motor ...................................................................... 18 V DC
Coupler ...................................................................... 1/4 in.
Switch ........................(VSR) Variable Speed and Reversible
No Load Speed .................................. 0-,600 r/min. (RPM)

SYMBOLS

SAVE ThESE INSTRUCTIONS

FEATURES

6 — English
WARNING:
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator's manual. If you
do not understand the warnings and instructions in the
operator's manual, do not use this product. Call Ryobi
customer service for assistance.
Torque .................................................................1,500 in.lb.
Impacts Per Minute .......................................... 3,00 BPM*
*Blows Per Minute (BPM) is the number of impacts per minute.