Ryobi P231 Operator's Manual
  1. Manuals
  2. Brands
  3. Ryobi Manuals
  4. Impact Driver
  5. P231
  6. Operator's manual

Ryobi P231 Operator's Manual

18 volt impact driver
Hide thumbs

Advertisement

Table of Contents

Your impact driver has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
18 VOLT IMPACT DRIVER
P231
BATTERIES AND CHARGERS
SOLD SEPARATELY

Advertisement

Table of Contents
loading

Related Manuals for Ryobi P231

Summary of Contents for Ryobi P231

  • Page 1 Your impact driver has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product.

  • Page 2: Table Of Contents

    n Introduction ... 2 n General Safety Rules ... 3-4 n Specific Safety Rules... 4 n Safety Rules for Charger ... 5 n Symbols... 6-7 n Features... 8 n Assembly ... 9 n Operation... 9-13 n Maintenance ... 14 n Parts Ordering / Service ... 16 This tool has many features for making its use more pleasant and enjoyable.

  • Page 3: General Safety Rules

    Use battery only with charger listed. MODEL BATTERY PACK (P100) P231 130255004 n Do not abuse the cord. Never use the cord to carry the charger. Keep cord away from heat, oil, sharp edges, or moving parts.

  • Page 4: Specific Safety Rules

    SERVICE n Tool service must be performed only by qualified re- pair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. n Hold tool by insulated gripping surfaces when per- forming an operation where the cutting tool may con- tact hidden wiring.

  • Page 5: Safety Rules For Charger

    SAFETY RULES FOR CHARGER WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. n Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, battery, and product using battery to prevent misuse of the products and possible injury or damage.

  • Page 6: Symbols

    Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME Volts Amperes Hertz Watt Minutes Alternating Current Direct Current...
  • Page 7 The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL DANGER: WARNING: CAUTION: CAUTION: SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair.

  • Page 8: Features

    Charger Input ... 120 V, 60 Hz, AC only Charge Rate ... 1 Hour Torque... Minimum 800 in.lb Blows Per Minute ...3000/BPM BUILT-IN COUPLER KNOW YOUR IMPACT DRIVER See Figure 1. Before attempting to use this product, familiarize yourself with all operating features and safety rules. SWITCH LOCK The switch trigger can be locked in the OFF position.

  • Page 9: Assembly

    Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST 1/4 in. Impact Driver Standard Bit (1) Adaptor Bit (1) Lanyard (not included in combo) Operator’s Manual...
  • Page 10 LED on charger will come on. NOTE: If the charger does not charge the battery pack under normal circumstances, return both the battery pack and charger to your nearest Ryobi Authorized Service Center for electrical check. n Charge the battery pack only with a recommended charger.
  • Page 11 LED. After 30 minutes, reinsert the battery pack in the charger. If the green LED continues to remain on, return battery pack to your nearest Ryobi Authorized Service Center for checking or replacing. NOTE: This situation only occurs when continuous use of the tool causes the batteries to become hot.
  • Page 12 WARNING: Battery tools are always in operating condition. Therefore, switch should always be locked when not in use or carrying at your side. CAUTION: The metal surface may become hot during use. Avoid contact with it to avoid possible burn injury. SWITCH TRIGGER See Figure 4.
  • Page 13 BIT STORAGE See Figure 5. When not in use, bits provided with the tool can be placed in the storage area located at the bottom of the tool handle. INSTALLING BITS See Figure 6. n Lock switch trigger on the tool by placing the direction of rotation selector in center position.

  • Page 14: Maintenance

    Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at a Ryobi Authorized Service Center. BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING Consult your local waste authority for information regarding available recycling and/or disposal options.
  • Page 15 NOTES...

  • Page 16: Parts Ordering / Service

    Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers.

Table of Contents