Wwr Test Mode - Pioneer deh-p7200hd Service Manual

1

6.3 WWR TEST MODE

QQ
3 7 63 1515 0
1. Outline
Conducting the test on the WWR module and displaying the test result on the OEL.
A
2. How to operate
Press Reset button while pressing TAG + EJECT.
Then, turn on the TUNER.
Transmission of the commands for the test mode
The commands that are required to be transmitted for the test mode are as listed in the table below:
Command Required
HDR reacquisition request
Reset Errors
B
Digital only mode / Analog only mode
Auto mode
Split mode (Left = Analog, Right = Digital)
/ Normal mode
The keys to be actually used in the test mode are assigned to the 1 to 6 keys of the remote control shown in the above table and
output the dedicated test mode commands.
Other keys output the same commands as in the normal TUNER operation.
Short Press 1 (Remote Control)
Short Press 2 (Remote Control)
Short Press 3 (Remote Control)
Short Press 4 (Remote Control)
C
Short Press 5 (Remote Control)
Short Press 6 (Remote Control)
Press 1 (Remote Control) for two seconds or longer
Press 1 (Remote Control) for two seconds or longer
Press 3 (Remote Control) for two seconds or longer
Press 4 (Remote Control) for two seconds or longer
TE
L 13942296513
Press 5 (Remote Control) for two seconds or longer
Press 6 (Remote Control) for two seconds or longer
3. Details of the information to be displayed
When displaying the TUNER frequency
TUNER
D
Details of the Information
HD Icon (information of the audio being received)
BAND
Stereo Icon
Pch Number
LOC Icon
Frequency
When displaying the character string
TUNE
E
Details of the Information
HD Icon (information of the audio being received)
BAND
Stereo Icon
Pch Number
www
LOC Icon
Display the left-aligned character string of the test result that was sent from the WWR module as it was received.
F
34
1
http://www.xiaoyu163.com
2
Reacquire the digital signal
Reset the information below
Audio Frame Information /
/ Core Audio Frame Error Rate Information
Enhanced Audio Frame Errors Information / Enhanced Audio Frame Error Rate Information
Number of Blend Information / P1 BER Information / P2 BER Information
P3 BER Information / PIDS BLKR Information
Switch the blend mode between Digital and Analog
Set the blend mode to Auto
Switch the mode between Split and Normal
* Split mode: the mode that outputs the analog sound from the left speaker
and the digital sound from the right speaker
KEY
Go up to switch the display item
Go down to switch the display item
Digital only mode / Analog only mode
Auto mode
HDR reacquisition request
Split mode (Left = Analog, Right = Digital) / Normal mode
Switch the display mode
Reset Errors
WWR-V.UP Mode Change (for rewriting with GK jig)
x ao
y
. i
DEH-P7200HD/XNUC
2
http://www.xiaoyu163.com
3
8
Description
Core Audio Frame Errors Information
Operation
Q Q
3 6 7 1 3
u163
.
3
4
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
4
9 9
2 8 9 9