NComputing PC Expanion L100 User Manual page 76

How to assign a PC Expanion
1 Go to <Start> ▶ <All Programs> ▶ <NCT-2000-XP> ▶ <NCT-
2000-XP Console>. Go to <Hardware Settings (Local/LAN)> ▶
Select <UTMA/UTSA Devices> and then double-click the PC
Expanion that you would like to change.
2
Click the <Member of Groups> in the "UTMA/UTSA Device
Overview".
3 Click the <Add> button.
4
Select the group that you would like to group in "Available groups"
and click the <OK> button.
5
Click the <OK> button or the <Apply> button.
8-35