NComputing PC Expanion L100 User Manual page 7

Using the PC Expanion (Advanced)
Part 8
1. How to add a new user account
2. How to check the IP address setting of PC Expanion
3. How to check the IP address of the host PC.
4. How to connect between the PC Expanion and the host PC using network equipment.
5. How to connect the PC Expanion to the host PC directly
6. How to connect to the specific host PC
7. How to connect to the specific host PC automatically
8. How to log in automatically when the PC Expanion connects to the host PC.
9. How to send a message to the connected PC Expanion
10. How to start or stop running the NCT-2000-XP application
11. How to terminate an active PC Expanion.
12. How to see the screen running PC Expanion
13. How to control the running of the PC Expanion by an administrator
14. How to log in to the host PC automatically
15. How to set the timer for a 'system shutdown' message
16. How to enable or disable the function of sending a message
17. How to view and take control of the PC Expanion
18. How to stop the station automatically when the PC Expanion is disconnected
19. How to run both NCT-2000-XP program and an application using Windows RDP
20. How to see the background-bitmaps image of PC Expanion
6
8-1
8-5
8-7
8-11
8-13
8-16
8-20
8-21
8-22
8-22
8-24
8-24
8-25
8-26
8-28
8-9
8-18
8-23
8-26
8-27