How To Set The Password Of The Nct-2000-Xp Program; How To Use The Usb Port In Case Of L2Xx Model Series - NComputing PC Expanion L100 User Manual

21. How to set the password of the NCT-2000-
XP program
Be sure to set your password to prevent anyone other than an
administrator from changing the NCT-2000-XP console settings.
You can set a password when you install the NCT-2000-XP application.
To set a password when you install the program, enter a password in
the 'New Password" and 'Confirm Password' and click the <Next>
button instead of selecting 'Do not set administrator password.'
1 Go to <Start> ▶ <All Programs> ▶ <NCT-2000-XP> ▶ <NCT-2000-
XP Console>. Go to <Software Settings (local)> ▶ <Information &
Settings> ▶ Select <System Settings> and then double-click the
'Administrator Password' option on the right.
2
If 'Disable password protection' is
checked, uncheck the option. Type
new password in the 'Password'
and 'Retype Password' column.
Then click the <Change Password>
button. Click the <OK> button or
<Apply> button.
22. How to use the USB port in case of L2XX model
series
A user can set a USB storage device connected to a host computer so that
a specific PC Expanion can access it. The L200 model provides a USB port
so that a USB device can be connected to it directly. A USB storage device
directly connected to the L200 is not accessible by a user using another
PC Expanion. Only a user using the L200 can access a USB storage device
directly connected.
* The USB port on the L200 model does not
support the USB device or USB storage device
or USB printer under Linux.
8-29