NComputing PC Expanion L100 User Manual page 33

Ncomputing co., ltd. pc expanion user's guide
Table of Contents

Advertisement

System Settings
Displays the general information on the system.
Maximum number of stations (incl. Host) : Displays the
maximum number of stations that can be connected to the
host computer.
Current number of additional stations : Displays the number
of users that are connected to the host computer and is
currently being used.
This machine : Displays the name of the host computer. The
name of the computer can be changed by using the
<Computer name> option at the Windows system registration
information menu.
This user : Displays the names of the users who have logged on
the host computer.
System uptime : Displays the logon period of the host
computer's operating system.
Main Station AutoLogon : Displays an option to automatically
start the stations, which are connected to the host computer, at
boot-up.
6-5
Delay until shutdown (seconds) : The shutdown time of
each station when the host computer shuts down can be set.
The range of the input value is from 1 second to 999
seconds.
Disable Send Broadcast Message : Displays an option that
can activate or deactivate the message sending mode for
each station.
Prevent access of the USB-storage devices to the
attached terminal. : Displays an option which can activate
or deactivate the USB-storage devices.
Remote View/Control allowed : Displays an option that an
administrator can view or control the PC Expanion remotely.
Clean up disconnected sessions not in use : Display an
option that the session can be terminated, if the user does
not log on again after disconnecting.
Support WTSAPI32 Interface : A program, which uses the
Windows RDP function, can be selected by using this mode.
If this feature is enabled, all NComputing protocols are
automatically converted to RDP-compatible formats. Use
this for Terminal Services Compatibility issues.
Disable background-bitmaps under Windows XP :
Displays an option which can display the background image
under the Windows XP operating system.
Administrator Password : Entering a password to use the
NCX-2000-XP program can be activated or deactivated by
using this mode. If the user does not wish to have a
password, the 'Disable Password Protection' must be
selected.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L120L200

Table of Contents