Cobra 2004 King Owner's Manual page 13

3. Using a 13 mm wrench, remove the oil drain bolt located on the right side of
the engine, on the clutch cover, near the brake lever (Item 2, figure 1).
4. After it has drained, reinstall the bolt being sure that the copper gasket is in
place. Torque to 15 Nm (11 ft-lb).
5. Reapply oil from oil fill plug 235 cc (8.0 oz) Cobra Venom 3 Shoe Clutch Milk,
or Dexron III Automatic Transmission Fluid, thru the oil fill plug.
NOTE:
Lean bike over onto it's left hand side so that the clutch cover is up unless you
have a squeeze bottle.
6. Reapply the oil fill plug, hand tight, being sure the fiber gasket is in place.
CAUTION:
Cobra has spent considerable time and money developing the proper lubrication
to handle the harsh environment of the automatic clutch and transmission of this
motorcycle. Cobra's specially developed Cobra Venom 3 Shoe Clutch Milk (Part
# MCMUGF01) was formulated to provide superior lubrication and cooling
capability over extended periods of time and is the recommended lubricant for
your Cobra motorcycle.
Figure 1
12