Table of Contents
Advertisement
ZIGBEE Networking Instructions
9.5 Import the signal to be displayed. Click the signal source in "Standard" on control panel, as
shown below:
Control power-on/off.
Select LampMode, CeilingMode,RearMode,StandbyMode, Source.
Screen menu control.
9.6 Input signal and you may see the effect after blending by two projectors, as shown below:
Note: After successful networking, there is no need to reset while use the projector after power is
cut off. You only need to open file "projectorWLAN.exe", and perform the settings as shown below.
86
Connection
Advertisement
Table of Contents
